Easy-to-refill Elongated Cartridge Pack for BROTHER LC101, LC103, LC105, LC107, LC109
Part Number: IBR-SP-LC103C
Easy-to-refill Elongated Cartridge Pack for BROTHER LC101, LC103, LC105, LC107, LC109
Product packaging may vary
Easy-to-refill Elongated Cartridge Pack for BROTHER LC101, LC103, LC105, LC107, LC109
Part Number: IBR-SP-LC103C

This product contains 4 very big, easy-to-use refillable cartridges with auto-reset chips for the BROTHER LC101, LC103, LC105, LC107, LC109 cartridge series.

In Stock

QTY:
$26.95

Filling these refillable cartridges is extremely simple: remove the plug, inject ink, and replace the plug.

The cartridges are much bigger than original Brother cartridges. They can fit up to 100ml of black ink or 80ml of color ink which means that you have to refill a lot less often.

These cartridges are built with auto-reset chips. When the printer displays a low ink level, simply remove the cartridge and put it back in to reset the displayed level to full.

Note that the cartridges are translucent, so you'll always know how much ink you have left inside.

NOTE ON THE PRINTER'S DOOR:

If you have an MFC-J4310DW, MFC-J4410DW, MFC-J4510DW, MFC-J4610DW, MFC-J4710DW printer:
For these e cartridges to fit into the printer, the door will have to be removed. This is easy to do and is explained in detail in the product instructions. Once the door is removed, the door clip included with this product will depress the printer's door sensor so that the printer thinks the door is closed. For a refillable cartridge system that does not require that the door be removed, see our standard-size cartridges.

If you have any other printer model:
For these elongated cartridges to fit into the printer, the door will have to be removed. This is easy to do and is explained in detail in the product instructions. However, once the door is removed, you will need to depress the door sensor on the printer so that the printer thinks the door is closed. A Phillips screwdriver, a 4" nail, or even a brown plastic coffee stirring stick can all do a good job at depressing the door sensor so that the printer thinks the door is closed. See the picture to the right. Our instructions will show you how to access the printer's door sensor. Note that we also offer refillable cartridge system that does not require that the door be removed, see our standard-size cartridges for details.


The refillable cartridge set
installed in the printer.

This product contains the following:

  • 1 100ml Empty Black Refillable Cartridge with Auto-Reset Chip
  • 1 70ml Empty Cyan Refillable Cartridge with Auto-Reset Chip
  • 1 70ml Empty Magenta Refillable Cartridge with Auto-Reset Chip
  • 1 70ml Empty Yellow Refillable Cartridge with Auto-Reset Chip
  • 4 Air Filters
  • Door clip (for MFC-J4310DW, MFC-J4410DW, MFC-J4510DW, MFC-J4610DW, MFC-J4710DW printers)
  • Easy detailed graphic instructions

For those that want refillable cartridges that do not stick out of the printer, we also offer standard-size cartridges which fit in the printer with the door closed.

NOTE: This product is intended for printers bought in North America (USA/Canada) only. Customers from other regions, please click here.

Brother
DCP-J152W
MFC-J245
MFC-J285DW
MFC-J4310DW
MFC-J4410DW
MFC-J450DW
MFC-J4510DW
MFC-J4610DW
MFC-J470DW
MFC-J4710DW
MFC-J475DW
MFC-J650DW
MFC-J6520DW
MFC-J6720DW
MFC-J6920DW
MFC-J870DW
MFC-J875DW
Cartridges
LC101BK
LC101C
LC101M
LC101Y
LC103BK
LC103C
LC103M
LC103Y
LC105C
LC105M
LC105Y
LC107BK
LC109BK

FOLLOW
JOIN OUR MAILING LIST
Enter your email address to receive InkOwl's monthly newsletter containing updates and promotions regarding InkOwl's products. You can withdraw your consent at any time.

Inkowl® is a registered trademark of 9942602 Canada Inc.   All rights reserved.
Brother®, Canon®, Dell®, Epson®, HP®, Lexmark®, Samsung® and other manufacturer brand names and logos are registered trademarks of their respective owners who have no association with or make any endorsement of the products or services provided by inkowl.com. Any use of a brand name or model designation for a non-OEM cartridge or product is made solely for purposes of demonstrating compatibility.